Name: Automatische Armpositionen
Availability: schema.org
Author: Bio Farmer Many

Galerie

Beschreibung

LS25 Automatische Armpositionen

Auto Arm Positions

**Save your loader positions once — and recall them whenever you need them. No more fiddling with lift, tilt, and telescoping.**

—

## What does this mod do?

Imagine you’re driving silage into your silo. Each time:
– Bucket down → scoop up material
– Bucket up → drive to the trailer
– Bucket tilted → tipping
– Bucket down again

Constantly repeating the same movements, constantly adjusting three axes. **With this mod, you save each position once — and recall it at the touch of a button.** Your loader automatically moves into the desired position. Lifting arm, bucket tilt, and even telescopic extension — all at once.

Works for:
– **Shovels** (silage, manure, bulk materials)
– **Pallet forks**
– **Bale spikes**
– **Forklifts**

With **4 modes** and **12 slots per mode** you have up to **48 positions per vehicle**.

—

## ⌨ Key assignment

**Note:** Num Lock must be enabled for Num Lock keys. If the keys don’t respond or conflict with other mods, simply reassign them in the game menu under **Options → Input**.

—

## Step-by-step: First use

### Example: Loading silage into the trailer with the front loader

**1. Select Mode**
– Get on the loader (or the tractor with the front loader attached)
– Press **O** until the HUD displays: *“Mode: Bucket“*

**2. Saving Positions**
– Move the shovel to **Loading Position** (at the bottom of the material, slightly tilted)
→ **Alt + O** → *“Shovel – Slot 1 saved“*
– Move the shovel to **Transport Position** (high, slightly tilted back)
→ **Alt + O** → *“Shovel – Slot 2 saved“*
– Move the shovel to **Dump Position** (over a trailer, tilted forward)
→ **Alt + O** → *“Shovel – Slot 3 saved“*
– Move the shovel to **Reverse Position** (medium height, empty)
→ **Alt + O** → *“Shovel – Slot 4 saved“*

**3. Use during operation**
– Arrived at the material → **Numpad 7** → Bucket moves to loading position
– Material picked up → **Numpad 7** → Bucket automatically lifts
– Over trailer → **Numpad 7** → Bucket automatically tilts
– Returning to the material → **Numpad 7** → Bucket in reverse position
– At the material again → **Numpad 7** → Returns to first position

Four keystrokes per cycle instead of constant mast pushing!

—

## Tips for optimal use

### Separate Slots for Each Vehicle
Each vehicle stores its own **slots**. Your front loader tractor and your wheel loader have independent positions. For front loader attachments, the slots are linked to the **loader itself** — you can attach it to a different tractor, and your positions will be retained.

### The correct mode for each attachment
When switching between bucket and pallet forks:
– Press **O** until the appropriate mode is active
– Slots of the respective mode remain saved separately
– Switching back with **O** restores the old slots

### Empty slots are skipped.
You don’t have to fill all 12 slots. If you only fill slots 1–4, **Numpad 7** will jump back to slot 1 after slot 4 — slots 5–12 will be skipped.

### Overwrite Slot
**Alt + O** saves to the next slot in the sequence (1 → 2 → 3 → … → 12 → 1). When all 12 slots are full, slot 1 is overwritten.

### Caution in enclosed spaces:
When starting up, **all axes move simultaneously**. If your „High Drop“ slot was saved in a hall and you are standing in a low barn, collisions with the ceiling may occur. No problem in open areas.

—

## Supported Vehicles

Basically, the mod supports any vehicle that has hydraulic controls in the game.

—

## Save to Savegame

All saved positions are **automatically** saved in the game. They will be restored when you start the game. This applies to each vehicle separately. You don’t need to manually export or save anything.

—

## Multiplayer

**Multiplayer compatible** — the mod can be used on MP servers.

– Slots belong to the vehicle, not the player.
– If you save slots and another player takes over the loader, they can use the same slots.
– When saving on a multiplayer server, the slots are stored in the server’s save file.

**Multiplayer Beta Notice:** Saving slots by client players has not been extensively tested. If you encounter any problems, please let us know.

—

## Installation

1. **Do not extract the ZIP file**
2. Copy it to the FS25 mod folder:`C:\Users\\Documents\My Games\FarmingSimulator2025\mods\`
3. Start the game → load a save game or create a new profile
4. Activate the mod in the mod menu
5. Get on a loader — let’s go!

—

## FAQ

**What happens if I accidentally save to the wrong slot?**
Press **Alt + O** repeatedly — the next save operation will go to the next slot. After 12 repetitions, slot 1 will be available again and can be overwritten. Alternatively, you can move the loader to the desired position for that slot and press **Alt + O** at the right time.

**Are the claw positions of grippers also saved?**
Yes. For gripper tools with an additional claw axis, the claw state is also saved. So, if you save slot 1 with „claw open“ and slot 2 with „claw closed,“ these states will also be restored when the gripper is moved.

**Does this also work if I want to open/close a grabber while the movement is running?**
Yes, but it will jerk because the mod is trying to move the claw to the saved value at the same time, and you’re working against it. Let the auto-movement finish first.

**Can I change the keys?**
Yes, in the game menu under **Options → Input** you can reassign each key.

**What if the mod doesn’t do anything on a particular vehicle?**
The vehicle probably doesn’t use the standard hydraulic system (cylindered) or doesn’t have any controllable tools. This can happen with very old or exotic mod vehicles.